Hi,
What does the PM_MASTER, PM_RECIVER, POWERPM_MASTER, POWERPM_RECEIVER, ONNOFF terms means in the TRM. Iam configuring the TPS65950 chip as Master mode in my schematics, but the registers mentione under these Instance are having same address. How does we can differentiate these terms.
Is there any setting avaiable for this to access or set?
Thanks in advance
Regards,
V.Yuvaraj
The registers are differentiated based on the function and internal blocks. If you refer figure 5-8 in TPS65950 TRM then you will see that the power management state machine shows two blocks as master and receiver.
Configuring the device in master mode has nothing to do with the way registers are differentiated.
For simplicity you can completely ignore those fields.
Gandhar.
ALL CONTENT AND MATERIALS ON THIS SITE ARE PROVIDED "AS IS". TI AND ITS RESPECTIVE SUPPLIERS MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF THESE MATERIALS FOR ANY PURPOSE AND DISCLAIM ALL WARRANTIES AND CONDITIONS WITH REGARD TO THESE MATERIALS, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHT. NO LICENSE, EITHER EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, IS GRANTED BY TI. USE OF THE INFORMATION ON THIS SITE MAY REQUIRE A LICENSE FROM A THIRD PARTY, OR A LICENSE FROM TI.
Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI and its suppliers reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.