Hi Rudye,
Thanks for your proactive approach in helping TI user community.
We have decided to use TI's AMC6821 thermal sensor for our Telecom Network Processor chip at RMI.
I am able to write and read the registers in AMC6821. But the local and remote temperature registers always struck at default values.
I enable the config register#4 bit 1 to value 1.
Could you please let me know the procedure and where I am doing wrong. Or is there a special way to read these registers. Imean certain sequence etc.
And also if you have any driver source code for this chip, please sent it across.
Thanks in advance,
Narasimha
nbetini@rmicorp.com
Narasimha,
Have you set "1" the START bit (bit 0) of Config register 1 (Address 0x00) , which is default "0" or stop? Please refer to page 12 in the d/s.
Also, you said you "enable the config regsiter #4 bit 1 to value 1", which maybe a typo (because the bit 1 of Config register #4, address 0x04, is reserved)?
Regards
Wendy F.
ALL CONTENT AND MATERIALS ON THIS SITE ARE PROVIDED "AS IS". TI AND ITS RESPECTIVE SUPPLIERS MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF THESE MATERIALS FOR ANY PURPOSE AND DISCLAIM ALL WARRANTIES AND CONDITIONS WITH REGARD TO THESE MATERIALS, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHT. NO LICENSE, EITHER EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, IS GRANTED BY TI. USE OF THE INFORMATION ON THIS SITE MAY REQUIRE A LICENSE FROM A THIRD PARTY, OR A LICENSE FROM TI.
Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI and its suppliers reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.