Does anyone know where I can get the dimensions for a 6 pin SON (DRY) footprint for the TPD4E004? I am laying out a PCB for the MSP430F5529 and wanted to add ESD protection to the USB port as on the MSP-TS430PN80USB board.
Kind Regards,
Andrew.
Hi Andrew,
pls refer to the date sheet here (http://focus.ti.com/lit/ds/symlink/tpd4e004.pdf , 4-Channel ESD-Protection Array for High-Speed Data Interfaces (Rev. A)). The dimensions were on page 10. You may also want to have a look at SN75240 USB Port Transient Suppressors (Rev. G) too.
Kind regardsG**kbuster
I am looking for the footprint dimensions not the part dimensions.
Cheers,
Andrew,
Hi,
yes, your right! I was unable to find a footprint for the 6-pin SON (DRY) package on the TI website too.
RgdsG**kbuster
ALL CONTENT AND MATERIALS ON THIS SITE ARE PROVIDED "AS IS". TI AND ITS RESPECTIVE SUPPLIERS MAKE NO REPRESENTATIONS ABOUT THE SUITABILITY OF THESE MATERIALS FOR ANY PURPOSE AND DISCLAIM ALL WARRANTIES AND CONDITIONS WITH REGARD TO THESE MATERIALS, INCLUDING BUT NOT LIMITED TO, ALL IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHT. NO LICENSE, EITHER EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, IS GRANTED BY TI. USE OF THE INFORMATION ON THIS SITE MAY REQUIRE A LICENSE FROM A THIRD PARTY, OR A LICENSE FROM TI.
Content on this site may contain or be subject to specific guidelines or limitations on use. All postings and use of the content on this site are subject to the Terms of Use of the site; third parties using this content agree to abide by any limitations or guidelines and to comply with the Terms of Use of this site. TI and its suppliers reserve the right to make corrections, deletions, modifications, enhancements, improvements and other changes to the content and materials, its products, programs and services at any time or to move or discontinue any content, products, programs, or services without notice.